Custom Test Rig Design
Get the data you need to make better decisions in less time with an Ignitec test rig.
The Ignitec advantage
Need a Test Rig but Short on Time or Resources? Ignitec Makes Custom Test Rig Design Simple and Straightforward.
Why use our Test Rig Design Service?
- Tailored Design – We design each rig to fit your specific needs.
- Custom Mechanical Components – We engineer components for your exact requirements.
- Seamless Integration – Our rigs are designed to work with your current hardware.
- High-Quality Components – We use only the best to ensure stable, quick, and accurate data gathering.
- Custom Hardware – We build hardware designed for your unique needs.
- Custom Software – We offer control and data logging software, with real-time graphs and CSV data logging.
- Custom Wiring Solutions – We design wiring solutions that meet your connectivity needs.
- Post-Delivery Support – Our engineering team is there for you when you need them.
- Efficient Processes – We take a modular approach to ensure quick delivery.
- Safety Features – Every rig comes with standard safety components.
- Detailed Documentation – We provide clear instructions and all the necessary details.
- Training – We make sure your team is prepared for successful operation.
At Ignitec, we’re passionate about transforming intricate ideas into accessible, practical solutions. We’ve been designing and building bespoke test rigs for over a decade, catering primarily to the life sciences and energy sectors, but our expertise extends across multiple domains.
The Challenge
We understand the constraints of limited resources, rigid budgets, and pressing deadlines. Building an in-house custom test rig, while managing these challenges, can be a daunting task. This is exactly where Ignitec steps in.
Our Solution
Over the years, we’ve constructed hundreds of test rigs tailored to various tests – from endurance and performance testing, safety validation to innovative concept verification. Our approach is flexible and customised, recognising that each testing scenario is unique. We ensure that each test rig is designed and built to cater specifically to your project, enabling you to validate the performance and safety of your products or components effectively.
Expert Team
Our skilled team brings together their expertise in mechanical and electrical engineering, control systems, and software development to create your bespoke test rig. We guarantee seamless integration of our hardware with your existing systems. Our custom software provides comprehensive control and data logging capabilities, offering a well-rounded solution.
Specialised Skills
Our proficiency isn’t limited to hardware. Our team is adept at handling intricate scenarios involving gases and liquids, even in complex microfluidic environments. Our expertise covers comprehensive heating and cooling systems, and we’re capable of generating aerosols and vapours. With specific experience in designing systems for targeted lung drug delivery, our skills cater to a wide range of needs.
Aftercare Service
Our commitment doesn’t end with the delivery of your custom test rig. We extend our support beyond this point, with our engineers always available to assist. Along with providing detailed documentation, we offer full training to ensure you’re confident in operating the rig, ensuring a smooth transition and continuous support.
Mesh Global
Ignitec®’s End-to-End Subsea Hardware Solution: A Case Study with Mesh Global
CASE STUDY | MARINE
Aarhus University
Design and Manufacturing of Environmental Monitoring Technology
CASE STUDY | SUBSEA
DigitalMe
Custom NFC device and tag emulator design
CASE STUDY | INTERNET OF THINGS
FAQs
What PCB design software do you use?
We use Altium Designer for most of our PCB design projects. We can work with files generated by most other software packages including KiCad, Proteus, Eagle etc. Get in touch with us if you have questions regarding a particular design software package or file format.
Will you sign an NDA
Yes, get in touch with us and we will advise you on how to get an NDA set up.
Our previous electronic engineer has left and I need to make a change to a design, can you help?
Yes, get in touch with us and we can take a look at your design.
I have an old piece of hardware which need updating and no design files, can you help?
Yes, get in touch with us and we can discuss options for updating your design.
I have a design and some of the parts have gone obsolete, can you help?
Yes, get in touch with us and we can discuss options for sourcing new parts and updating your design.
What types of electronic design services do you offer?
We offer comprehensive services including circuit design, schematic capture, PCB layout, prototyping, manufacturing, testing and software integration tailored to industries like medical, automotive, and IoT.
How quickly can you start working on my project?
We can begin design work on your project as soon as we understand your requirements, often starting within a few days of initial contact.
Do you handle manufacturing as well as design?
Yes, we provide full manufacturing services through our global network, ensuring your product is produced efficiently and to high standards.
Can you assist with product compliance and certifications?
Absolutely, we guide you through the entire compliance and certification process to meet industry standards and regulatory requirements.
What makes your prototyping service stand out?
Our prototyping service is fast and efficient, allowing for rapid iterations and testing to perfect your product before mass production.
Can you help with software and firmware too?
Yes, our engineers work closely with you to develop and integrate software that complements the hardware, ensuring seamless functionality and performance.
What industries do you specialise in for electronic design?
We specialise in electronic design for industries such as medical, automotive, defence, and IoT, among others.
Can you handle both small and large production volumes?
Yes, our global manufacturing capabilities allow us to scale production to accommodate both small batches (usually 1-2 units minimum) and large-scale runs (>100,000) effectively.
What technologies do you incorporate in your designs?
We work with a range of technologies including all common wireless technologies, FPGA, and microcontrollers, tailored to your project’s needs.
How do you manage project communication and updates?
We maintain open and regular communication with our clients, providing updates at every stage of the project to ensure transparency and alignment.
What support do you offer post-manufacture?
We offer ongoing support after manufacturing, including troubleshooting, further iterations, and additional compliance assistance if needed.
Can you assist with other aspects of my project, such as mechanical design, custom enclosures, and housings?
Yes, we can help with mechanical design, custom enclosures, and housings, providing a comprehensive solution that encompasses all aspects of your product’s physical design.
How long does prototyping and manufacturing take?
Prototyping typically takes 1-2 weeks, though we offer a 24-48 hour fast track option for urgent needs. Manufacturing larger volumes generally takes about 4 weeks.
How long does a project take from start to finish?
Typically, projects take between 4 and 12 weeks depending on complexity. Larger and more complex projects may extend up to 6 months or more, and these are usually structured in smaller stages of 4-12 weeks each.
I don’t know what my requirements are
Get in touch for a free consultation and our team will be happy to advise you.
Find Out How We Can Help – Contact Us for Expert Guidance on Your Next Project
Years established
Projects delivered
Clients served
-
James worked his ass off to get our project done
Luke Cox
26th September 2024Great engineers who understand your needs and work with you to make sure you’re happy with the end result, I would highly recommend Ignitec!
N Y
3rd August 2024It's been a great experience working with the product design teams at Ignitec over the last 9 years or so who are totally professional in everything they do. They come... read more
Ian Fisher
18th July 2024Great team to work with. Real can-do attitude and lots of great suggestions. Thanks!
Tom Marshall-Andrews
28th February 2024 -
Ignitec were great to work with - they helped us from concept through to the delivery of the project, with great attention to detail and weekly check-ins that kept us... read more
Adam Stark
16th February 2024It's rare to find a company so driven to please its customers. Ignitec have bent over backwards to help us get our fledgling product off the ground. The project hasn't... read more
Zeke Steer
3rd August 2023Ben and his team are just brilliant. In terms of quality, cost and every other important metric, Ignitec really deliver. Every encounter becomes a discussion with loads of good advice... read more
UltraMarine Safety
17th May 2023Ben and his team are just brilliant. In terms of quality, cost and every other important metric, Ignitec really deliver. Every encounter becomes a discussion with loads of good advice... read more
UltraMarine Safety
17th May 2023 -
I have worked with the Ignitec team for several years on many different projects and would highly recommend them to anyone in need of truly creative ideas and cutting edge... read more
Christian Thorne
14th August 2022Great guy's very friendly professional organisation
Kev Parkin
14th June 2020A great company to work for with some of the best talent in the design industry.
Dean Challis
14th June 2019A friendly and professional team, would gladly work with them again!
Steve Bills
14th June 2018
Get started
Our expert team is here to help with all of your electronic design, software and mechanical design challenges. Get in touch with us now for more information and a free review of your requirements.